- Exit signs Australia
- Portable Power Supply
- Australia&New Zealand Light
- Exit sign
- Emergency light twin spots
- LED Floor Staning Light
- Conventional Fire Alarm
- LED high bay light
- LED Batten Light
- LED Pendant Light
- LED Wall Light
- Emergency light battery
- LED emergency ceiling light
- LED ceiling light
- LED torch light
- Camping light
- Exit sign USA/Canada
LATEST NEWS
- new exit sign board for Europe market
- enlarged exit sign light produce line
- new emergency light with twin spots re
- Sunwindled release new led floor lamps
- OSHA’s requirements for establishing c
- thanks Mr Ben king Visit us
CONTACT US
- ADD: Block H,Juyin Industrial Park,Ganli Road 1#,Buji,Shenzhen,China
- TEL: 0755-89705011
- FAX: 0755-89705010
- E-mail: sales@eledfactory.com
> Conventional Fire Alarm
Addressable Heat & Carbon Monoxide 240-volt Alarm with 10-year lithium battery back-up
- Product description: Dual Heat and Carbon Monoxide (CO) 240-volt Alarm with 10-year lithium battery back-up,Firm alarm Heat & Carbon detector
PRODUCT INTRODUCTION
The SWS3028 is a dual Heat and Carbon Monoxide (CO) alarm. It
contains a proven electrochemical CO sensor to detect the presence
of toxic levels of CO as well as an independent fast acting Class A1
thermistor sensor to detect dangerous levels of heat, hence
eliminating the need for installing 2 products in areas where both
types of detector on would be required.
The SWS3028 is powered by 230V AC mains. In the event of mains
failure, the rechargeable 10-year built-in non-removable lithium
battery will provide up to 3 months power supply in the case of a
wireless RF installation or up to 6 months in any other case.
The AudioLINK feature facilitates acous c download of the alarm
parameters and status using a smart app.
The EIB3028 can be interconnected via hardwire or wirelessly
(through the EIB3000MRF module) enabling it to communicate with
compatible Brooks alarms and accessories. Up to 12 devices can be
interconnected.
During an alarm, “Fire” or “CO” will flash on the alarm to indicate
what has been detected. The flash rate of the red LED is dependent
on the type of detector on and in case of CO, on the level detected.
The EIB3028 self-checks its sensors, battery voltage and internal
circuitry every 48 seconds. Any fault condition found will be indicated
by a combination of yellow LED flashes and sound beeps.
The memory feature allows an alarm that has previously ac vated to
contains a proven electrochemical CO sensor to detect the presence
of toxic levels of CO as well as an independent fast acting Class A1
thermistor sensor to detect dangerous levels of heat, hence
eliminating the need for installing 2 products in areas where both
types of detector on would be required.
The SWS3028 is powered by 230V AC mains. In the event of mains
failure, the rechargeable 10-year built-in non-removable lithium
battery will provide up to 3 months power supply in the case of a
wireless RF installation or up to 6 months in any other case.
The AudioLINK feature facilitates acous c download of the alarm
parameters and status using a smart app.
The EIB3028 can be interconnected via hardwire or wirelessly
(through the EIB3000MRF module) enabling it to communicate with
compatible Brooks alarms and accessories. Up to 12 devices can be
interconnected.
During an alarm, “Fire” or “CO” will flash on the alarm to indicate
what has been detected. The flash rate of the red LED is dependent
on the type of detector on and in case of CO, on the level detected.
The EIB3028 self-checks its sensors, battery voltage and internal
circuitry every 48 seconds. Any fault condition found will be indicated
by a combination of yellow LED flashes and sound beeps.
The memory feature allows an alarm that has previously ac vated to
be easily identified (through the red flashing LED).
PREVIOUS：Addressable Fire Alarm System Remote LED One 8mm LED provide local 360 degree visible alarm indication Fire Detector Activated
No next
Michael
Kingtech